Universal chuck for wire spool
- 1.2k views
- 1 like
- 59 downloads
3D model description
Universal quick change chuck for wire spool. it accepts coils whose internal Ø goes from 53 to 59mm.
To be mounted on a Ø 18 tube
the rear part is held on the tube by a M5 headless screw and a drilled nut. Or by gluing if you do not have grub screws.
Requires a spring Ø 7mm hard enough for a good maintenance.
Super easy to use.
You press the button and you remove the chuck
3D printing settings
Use of support for the housing of the slider.
the model was printed in 230 ° ABS, 90 ° tray, 30% filling.
Diameter 60 x 25 mm for the thickest part.
- 3D file format: STL
- Publication date: 2018/01/23 at 18:38
Page translated by automatic translation. See the original version.
Best sellers of the category Tool
Add a comment
Would you like to support Cults?
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.