Lamp with 18W LED spotlight (or other model with different power and shape)
Less than 15€ of material
LED strip at the rear (6 LEDs of 24V)
USB charger in the cradle or cradle without charger.
With an X20Team Parkside battery of 20V-2A/h it lasts 4 hours!
USB Power Module
Flat Electrical Lug 6.3 mm Blue
For the lug, remove the plastic insulation and the tube diameter should be 3.5 mm.
To be soldered on 0.75mm wire
Welds to be protected with heat-shrinkable tubing
The different squares to choose from depending on the projector model.
Provide 4 M3 screws and nuts
PLA 0.2mm layer
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!