IoT Cyclops Tweeter
- 711 views
- 0 likes
- 5 downloads
3D model description
This is a Housing for the Adafruit IoT Thermal Printer project.
3D printing settings
Print-out, 0.3mm layers, the Front and Back housings add required components and watch your tweets etc print out and tear them off. There are other grate projects for this to print the weather, appointments etc.
This is printed on a Ultimaker with a 0.6mm nozzle and heatbed with Kapton tape.
The back housing requires some internal support! Print with CURA and crack the support out with a flat blade screwdriver. Try printing it either on its base or open-front on the platen.
The front face has in built teeth which only seem to print with Slic3r and not Cura?
I had trouble printing this with ABS as it lost dimension in the Z-axis due to shrinkage so, a new version will apear with different supports and print orientation for ABS & clip retaining details to keep the front face better connected.
- 3D file format: STL
- Publication date: 2018/11/05 at 17:24
Best sellers of the category Tool
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!