Skip to content


3D model description

Instacliip, an eco-system that can be immediately clipped for photo clips, the most beautiful instant videos.


Thanks to its cliip connectors, this documentation station can be adapted as required. The dimensions can be modified according to the needs of the Fablabs and the available space.


The connectors and all resources are in creative commons license (CC BY-NC-SA-3.0). Everyone is allowed to share it by any means, in any format and to adapt, modify it.


An entire eco-system is already available, connectors for the structure, clips for the power strip, cameras, lights and paper roll.

It is up to you to imagine the rest and make this resort evolve.


BLUE cliip = jaw connector closed -> fixed

RED cliip = open jaw connector -> removable

YELLOW cliip = clip-on connector -> quickly removable

3D printing settings

layer height: 0.3mm

wall thickness: 0.8mm

thickness above/below: 0.8mm

filling density: 20%.

  • 3D model format: STL and ZIP



Followers Followings 14
Downloads 1056
Sales $104

Diplômé en Design produit et Architecture d’intérieur avec les félicitations du jury à l’école Pivaut Nantes en 2012, après différentes expériences dans des agences Parisiennes, j’ai tout d’abord travaillé chez Eric Gizard Associés et ensuite dans l’Atelier Marika Chaumet.

Courant 2013, je me lance sur Nantes en indépendant, depuis entre collaborations avec des architectes, des designers et travaillant sur des créations personnelles notamment en produits, mon expérience s’est fortement enrichie.

Aujourd’hui je travaille le produit, l’espace et le graphisme, ces trois pratiques d’apparence distinctes sont pour moi constamment complémentaires dans ma démarche créative. Mon approche quotidienne sur mes créations passe continuellement par des phases de recherche de formes, d’expérimentation de matières, afin de toujours obtenir des réalisations simples, purs et techniques.



Page translated by automatic translation. Suggest a better translation

Similar 3D files

Best sellers of the category Tool

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest, Banggood, Aliexpress or Ebay.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!