Insta-tripod and monopod
Make sure to read "instructions.pdf"
It's a really portable and compact tripod or monopod, depending on your needs, which you can assemble in a fraction of a second. It's available in both the American and European versions.
For this project is also required a special screw which you can find on Amazon for very cheap (5$) and a 3m/10 ft string. Whether you need extra stability, you may need to get a wall hook 4cm/1.5in long and 3mm/0.12in in diameter on which you can hang a weight. -Every component must be printed without supports and requires only minor clean up(poking the bridge on the bottom of the screw).
For the main head, I strongly recommend using a raft (only for the head), to ensure stability during printing.
I hope you find it useful and easy to use, in case you have any sort of problem, drop a comment and I'll try to be as helpful as I can.
For other Countries---> instructions.pdf
--Wall hook (Optional)
Local hardware store
The head should be printed upside down. Use a raft if needed.
10% gyroid / 20%grid Infill
Adaptive down to 0.12 for the head / 0.2mm for everything else
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!