can be connected with a vacuum cleaner or a fan through adapter
This model is an improved model with a higher degree of purification and directed internal flow.
this model of cyclone filter for household vacuum cleaner nozzle Can be used in kitchen, bathroom, garage, lavatory, basement and toilet etc.
The model is made with much attention to details.
do not need to buy a finished product, print the number of pieces you need as many different colors
pipe size to connect 50 mm
Include 2 parts.
All real sizes you can see in the photos.
Everything can be seen in the photo.
The principle of operation of the cyclone collector is as follows:
A mixture of dust and gas enters the dust box along a horizontal pipe, rotates and settles at high speed down the barrel wall, and the “dust”
enters the vacuum cleaner below under strong centrifugal force and its own gravity. And the mini-broom with a mini-shovel gas discharges upwards
turbocharged cyclone dust collector is widely used in all industries, such as machinery, textiles, household appliances, food, grain, coal,
cement, building materials, heat output, metallurgy, steel, sweeper, plant for removing dust and personal processing dust production center.
can completely replace: a bag type dust removal plant; it has: a simple production process, Ultra-low production costs, low operating costs,
dust removal efficiency and constant pressure, the main maintenance-free benefits are incomparable for removing bag-type dust.
fix the collector on the lid of the tank for collecting dust and chips using 4 self-tapping screws
You can use any old paint bucket as a dust collector, for example. the main condition is tight hermetic closure of the lid on the container
Points for attention:
To ensure normal use of the cyclone dust collector, the intake air volume should be much larger than the dust content, the minimum air intake
should be greater than 70%. Otherwise, “dust choking”, i.e., a large amount of dust, will be detected in a vacuum. This is because the principle
of operation of the cyclone dust collector differs from the bag dust collector, therefore it is absolutely impossible to use a cyclone dust
collector as a pump unit, and store the suction nozzle in dust. If you do this, because there is no air in the dust collector or the air
content is too low, the discharge may only be “ash”!
placement of models on the printer table when printing is shown in the photo
The model can be printed as a 3D model, as well as produced on CNC machines.
Made in spaceclaim, tested in the manufacture of the master model of the product.
This is a fully solid-state version for 3d-print, this is not a scan version.
At the photos you can see the contours of the models on screens with stl or obj files, it is enough
to understand the possibility of printing a model or producing a model by a cnc machine
It is possible to model anyone another model according to your size or drawings and sketches.
ATTENTION! This item is a DIGITAL 3D model (*STL *OBJ file format) for ARTCAM, ASPIRE, CUT3D, Cura
anyone software applications for CNC and 3D printers.
Its files For CNC Routers and 3D printers.
Not a vectric, not a bitmap file, not a G-code. You buy a digital model image file for the manufacture of the product,
and not the product itself as a physical unit of goods made of glass or wood.
Non-commercial use only.
Modeling products and preparing products for production on CNC machines and 3D printing on production printers. Design of private houses, fences, doors, gates, furniture, industrial and industrial products of a wide range. I will answer all questions, only consider the possible misunderstanding asso.
Engineering design, the creation of electronic forms for the manufacture of prototypes, parts or spare parts for casting aluminum, bronze alloys, resins, plastics and other materials, as well as for cutting, stamping and milling parts on CNC machines taking into account tolerances, fit and conditions processing and grinding of these parts, or printing of parts and products on an industrial 3D printer, including printing with metal mixtures and compositions with different types of application of these compositions on the surface.
The design process follows your drawings, drawings, sketches or full-scale details.
A serious approach to design allows you to avoid problems at the stage of manufacturing parts and manufacturing parts from different materials and on different technological equipment. The use of modern software allows you to significantly speed up the process, creating layouts and prototypes of complex structures with a high level of detail. The resulting product is applicable to paperless production technology. Forms and formats of high-quality models of execution can immediately go to the CAM module for further translation into machine codes for CNC and 3D printers.
The obtained forms can be intended both for casting from a different number of fasteners of the form itself, and for manufacturing one-piece casting or part.
The form or model can be issued, including, in the form of STL AMF model ready to manufacture with a sufficient number of accurate polygons.
follow & contact me skype -> ygreknu twitter-> @Dzusto1
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!