Creality CR-10 V3 filament guide (new model)

26/11/20: Addition of a straight cone with less angle on the outer part for easier printing.

Single filament guide, to be fitted to the end of filament detector holder on the Creality CR-10 V3 and not reducing the useful printable Z-height.

• No gluing necessary, conical interlocking

• Interchangeable funnel and 90° elbow type tips.

• Adjustable elbow orientation thanks to the conical socket.

Free simplified version with only one 90° elbow to be glued :

https://cults3d.com/en/3d-model/tool/guide-filament-creality-cr-10-v3

Base:

• Printing walls upwards.

Right cone:

• Nesting printing on the tray side.

• Use supports (tree type gave me good results).

• Straight cone with less overhang for easier printing.stl" file available with less outside angle at the top of the cone for easier printing.

90° cone:

• Nesting printing on the tray side.

• Use of supports touching the tray only.