Easy to print and assembly Glide Bait. 100% working! No epoxy needed!
I worked really long on this lure, so please leave a like and a make!!!
There are 4 different Heads and 2 different Fin parts. You will figure it out ;)
I also designed Line Thru Head versions. You find them under remix.
For assembly instructions look here and scroll down: https://www.thingiverse.com/thing:3024248
2 outer walls
0.1 - 0.2mm layer height
no top and bottom layers (only important for S3D users)
Print orientation like on pic 2!!!
I allways drop one pellet of silica gel with tweezers into every air chamber while printing. So i have a rattle sound and i notice when there is water inside. (then there is no rattle sound anymore)
But with my printer and settings it is waterproof without epoxy.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!