Repteier Firmware for Geeetech G2S based on WBRUCEM https://www.thingiverse.com/thing:1301129
- PWM fan used to cool the printed object - needs rewiring of the fan cabling - see: website bechele.de - Autoleveling activated and configured - Autoleveling area reduced to 3 x 3 steps with only two repeats each. - Autoleveling positions swapped to prevent of mechanical crash after levelling when homing. - Preparation for printing ABS with temperatures up to 260 ° - Enabling of EEPROM use - Note: !! You need to send a M502 command once after software Upload to make Autoleveling work !! - Reduced the number of subsegments to get enough ram for runnig autolevelling.
This isn't a printable thing. It is a starting configuration for running Repetier-Firmware on the Geeetech Delta G2S printer. Many thanks to WBRUCEM for the great piece of work.
For more information visit:
bechele.de - english
bechele.de - german
Go to [https://www.repetier.com/firmware/dev/index.php]
Upload the enclosed .json file as your "old" configuration.
Complete the configuration tool steps, adjusting where needed to match YOUR printer.
At the end, choose "Download complete firmware" to retrieve the entire firmware package (.zip file).
Compile and upload to your printer as you have done with Marlin.
Further configuration changes should always be performed via the online configuration tool. DON'T edit your Configuration.h file directly.
Pay attention to the diagram showing how to measure dimensions of your printer. Some of these may differ slightly from the ones used in Marlin.
Extruder offsets are handled entirely within the firmware. You should enter ZERO offsets in your slicer and Repetier-Host configurations.
This firmware is under active development. If you happen to download a copy that fails to compile, just try again after a couple of days. Chances are the problem will have been fixed.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!