Skip to content

Filament Guide Tube Retainer - Replicator 2

Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

The filament guide tube is prone to popping out the back of the holders at the rear of the machine because the holders are open at the back. Refer image that show the problem...

These two parts resolve the problem... quick and easy to print and install. No more guide tubes hanging out the back...

3D printing settings

Print the two parts using a minimum of 3 shells and 35% infill, no raft or support required. Once printed, remove the small amount of manually added support (in the design) so the pins/lugs are cleared and able to locate into the U-shaped part.

Unload your filament before starting this so the filament guide tube is free.

Install when the build plate is lowered (i.e. after a print has completed) so the rear panel is accessible from the front of the machine. Push the U-shaped part through from the front over the metal chassis immediately in front of the standard guide tube holders... it will all make sense when you do it.

Next, push the second part into the U-shaped bracket, which will now be protruding through the rear of the machine, from the rear until it locks in place via the pins top and bottom. Make sure the larger hole of the second part is facing "up" as that will retain the filament guide tube. The smaller hole is where the filament will feed in from the bottom.

A bit of wiggling and force will be required but once in place it's on for good...

This eliminates the open rear of the guide tube holders so it is securely held in place.

  • 3D file format: STL
  • Publication date: 2019/07/05 at 15:35





Designs 257
Downloads 29.6k
Followers 291

Best sellers of the category Tool

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!