Fan_Duct_Valcano for Chad Mod
- 132 views
- 0 likes
- 0 downloads
3D model description
This is a part cooling fan duct for the chad mod with a E3D volcano hotend. I printed two test cubes, one with the fan on and another with the fan off. Pretty east to tell the difference. Also the X was on the side opposite the fan output.
I included a step file for easy modding.
There is no impact the the usable x-y space on the printer. The Volcano does eat up about 9mm of the z -axis.
I was playing with my Volcano when I printed it. 1mm nozzle with 0.8mm layer height and 1.2mm line width. It printed well, but I will say the the 0.8mm layer height is pushing it a bit. 0.56mm works a lot better, 0.36 works really good too.
I would suggest PETG or other high temp material for a finished print. I'm still running the latest prototype I printed in PLA, which has worked just fine with printing PLA. I doubt that it would hold up to printing high temp materials that want an enclosed print volume.
This is a remix from https://www.thingiverse.com/thing:3994628
- 3D file format: STEP and STL
- Publication date: 2021/02/01 at 11:14
Best sellers of the category Tool
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!