Skip to content

Face cover HINTECH - Tutorial included

Download free 3D printer files Face cover HINTECH - Tutorial included, Hintech_PulaDownload free 3D printer files Face cover HINTECH - Tutorial included, Hintech_PulaDownload free 3D printer files Face cover HINTECH - Tutorial included, Hintech_PulaDownload free 3D printer files Face cover HINTECH - Tutorial included, Hintech_PulaDownload free 3D printer files Face cover HINTECH - Tutorial included, Hintech_PulaDownload free 3D printer files Face cover HINTECH - Tutorial included, Hintech_PulaDownload free 3D printer files Face cover HINTECH - Tutorial included, Hintech_PulaDownload free 3D printer files Face cover HINTECH - Tutorial included, Hintech_PulaDownload free 3D printer files Face cover HINTECH - Tutorial included, Hintech_PulaDownload free 3D printer files Face cover HINTECH - Tutorial included, Hintech_PulaDownload free 3D printer files Face cover HINTECH - Tutorial included, Hintech_PulaDownload free 3D printer files Face cover HINTECH - Tutorial included, Hintech_PulaDownload free 3D printer files Face cover HINTECH - Tutorial included, Hintech_PulaDownload free 3D printer files Face cover HINTECH - Tutorial included, Hintech_PulaDownload free 3D printer files Face cover HINTECH - Tutorial included, Hintech_PulaDownload free 3D printer files Face cover HINTECH - Tutorial included, Hintech_PulaDownload free 3D printer files Face cover HINTECH - Tutorial included, Hintech_PulaDownload free 3D printer files Face cover HINTECH - Tutorial included, Hintech_PulaDownload free 3D printer files Face cover HINTECH - Tutorial included, Hintech_Pula

Makes created by the community

Did you 3D print this model?

3D model description

Very easy to print! Fully optimised for fdm technology with high-speeds.

DIY - you dont need laser engraver to cut transparent sheets.

ONLY 30 minute printing time!

A4 sheet

INCLUDED TUTORIAL WITH PRINTING SETTINGS!

Universal design - adjustable to face

Version1 - hole-diameter 4mm
Version2 - rectangle 13x3mm
Version 3 - holes for adjustable elastic strap

UPDATE: _bez - versions without text
UPDATE_1: _SCALED - dimension (119x116x16mm) -Not printed yet, confirm if design is okey!
UPDATE_2: _CLOSED - Closed version, thickness:0.5mm

Share, like 3D printanje Pula -HINTECH for more designs.

https://www.facebook.com/Hintech
https://www.instagram.com/3d_printanje_pula/

Design is not medical tested!!!

Non commercial!!!!!

TOGETHER WE ARE STRONGER!

3D printing settings

Specs:
Material: PLA/PETG
Mass: approx 22g
Printing time: approx 35min for 1 set

  • 3D file format: PDF and STL

Tags

Creator

License

CC BY NC

Collection associated with this 3D model

Best sellers of the category Tool


Add a comment

16 comments

Hola!, he echo unos 100 protect face para la municipalidad de Santa Fe, Villa cañas, las repartieron enttre personal de hospitales, policia, control urbano, etc, todavia no tuve comentarios de los usuarios en cuanto a su funcionalidad. Muchas gracias por compartir el modelo! Ciro Orciani

Hay unos fallos en el diseño.
Con los movimientos de la persona la careta transparente se desprende hay que re-diseñarla añadiendo en los clips un agujero y otro en el plástico transparente y un pasador para que no se caiga y añadir una goma alrededor de la cabeza o una tira de diámetro adecuado de velcro para diferentes diámetros de la cabeza y un ajuste firme

Hay unos fallos en el diseño.
Con los movimientos de la persona la careta transparente se desprende hay que re-diseñarla añadiendo en los clips un agujero y otro en el plástico transparente y un pasador para que no se caiga y añadir una goma alrededor de la cabeza o una tira de diámetro adecuado de velcro para diferentes diámetros de la cabeza y un ajuste firme

Yes, i am doing on that. Probably today afternoon will be uploaded after test print

Can you please make a "bended" version rather than "scaled"?
That way it would fit printer beds as small as 150 x 150 (Printrbot Simple Metal)

If not problem, send me picture of yours printer while it printing cover. I would like to make one collage image from all cover around World!

Scale it then little bit. All mine goes excellent.

Hello again! the clamp type piece that holds the transparent acetate, is too stiff to the point that it is difficult to fit it and it breaks, it does not fit me like you, any advice? I have followed all your steps. thanks

UPLOADED SCALED VERSION WITH DIMENSION 199x116x16mm

Hi yakupgovler, u can rescale it in percentage with Cura until it meets the printing dimensions you need, print a test and see if it is viable for a person's head. It doesn't really change the measurements too much.

Ender 3 pro has 22x22x25 cm bed size. I have 20x20x20 cm bed size (in fact most of printers has got this size) . Its width should be no more than 19 cm.

Hello, what are the correct measurements of the model? I have an ender 3 pro and I need to know to rescale and print, thanks.

Hi,
Your model is large for my printer. My printer has 20x20x20 cm size bed. Could you scale it to fit this size, please? It is urgent.

Default settings for PLA in Slic3r. Layer height:0.3mm,infill 100%, 200% tune speed on printer

HI,

35 minutes?

What are your settings please?


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest, Banggood, Aliexpress or Ebay.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!