NEW v2 slip on roller filament guide set top/bottom filament guides for creality ender 3. uses common 608 bearings often found in scooters and skateboards. v2 now has the ability to add or remove filament from the top filament guide without having to remove the filament completely from the extruder and hot end by adding a tight port the filament can snap in/out of the guide. you can use the spare M4*16 screw supplied with the ender to assemble the guides. thread in the m4 screw through the body and no nut will be required i designed this to minimise the amount of hardware required. the slip on feature of the top guide is tight and not designed to be pushed down into place but to be slid on to the end of the top gantry rail this gives the guide a very tight and secure mount to the printer you may have to remove the rail end cap if you have it installed. for each filament guide you will need
x1 bearing v ring
x1 guide body
x1 M4*16 screw
3d modeler and designer and 3d printing enthusiest.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!