First step WATCH the entire video: https://www.youtube.com/watch?v=R4Ks0-SLWyQ
Print the following: (gear Shaft,Elctro-Piston V2.0 gears.stl) (Small gear,Elctro-Piston V2.0 gears.stl) (Handle, Elctro-Piston V2.0 gears.stl) (main gear, Elctro-Piston V2.0 gears.stl)
(Piston Flywheel, Elctro-Piston V2.0 gears.stl) (piston generator front cap.stl) (piston generator end cap.stl) (piston generator piston.stl(print at 110%) (Stand Big, Elctro-Piston V2.0 gears.stl)
Then decide if you need a big wire holder or a small one. Depending on how much wire you have and how thick it is. The BIG one is (Wire Holder, Elctro-Piston V2.0 gears.stl). The SMALL one is (piston generator wire coiler.stl). If in doubt go for the big one.
Once you have coiled the wire on the spool heat up the part of the stand that holds the spool. Then press fit the stand to the spool. Do the wiring and glue it all together. If some pieces are stiff put them in boiling water and press the pieces together, or use a lighter.
FYI...I got my wire from an old transformer.
Please consider tipping me
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!