A Custom E3D V6 Holder using 40mm ducted fans and a E3D Clone.
I was able to 3D Print this in a couple of hours (1.5 to 2 HRS) using 0.2mm Z layer height with a 0.4mm nozzle.
Support is needed however, not essential if you have a fan shroud.
If you choose to use support use support only from build platform is needed, not everywhere because it is not necessary whether you have a shroud or not. Its just a tip to save you material. :)
Distance between Linear Bearings are 22.6 mm. All bolts are 3mm except the 25x5mm bolts that hold the belt. 3mm bolts are a variety of lengths so it would be easier to have an assortment of bolts.
An inventor and engineer. I enjoy 3D Printing and designing on my free time.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!