Use a M5 screw to fix the percussion on a clamp or a bloom up to 13mm diameter
Cut a Evans SoundOff pad to reduce impact sound following the pdf and screw it using m3 6mm screws and washers.
Screw the fixation on top of the soundoff with m3 10/12/16mm and nyloc nut.
Solder the two cables of the piezzo to a female jack connector using the schematic.
Print the clip and body with 0,2mm layers and +- 30% infill. No support needed for the body but better using support with the clip to print it like the stl original orientation
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!