Skip to content

Direct bowden extruder 1,75

Creation's quality: 4.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1 like

3D model description

direct drive extruder

designed to be installed on every flat surface on T-slot profile

in the pic it is mounted on the Z top bolt a Pi3.

The hole for the pipe fit is designed to be threaded with 1/8 NPT or M10 on both side

There is no need to open the extruder to insert the filament

there are slope on all the insertion holes just respect the direction of the filament.

Parts needed

1 drive wheel allowed diameter from 9 up to 10 mm

1 624Z roller bearing

4 M3 x 20 mm hex socket DIN 912

1 M4 x 16 ISO10642

1 M4 x 20 ISO10642

2 M4 nuts

2 M4 washers

3D printing settings

the body can be printed without supports, like the lever and the trap.

Suggested layer height 0,25 and 3 perimeter minimum.

printing time approx 2 hours depending on your printer settings.

  • 3D file format: STL
  • Publication date: 2019/07/17 at 11:51





Best sellers of the category Tool

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!