Skip to content

Delonghi Ecam 23.240 water tank switch jumper

Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1 download

3D model description

My DELONGHI coffee machine ECAM 23.240 was broken. Error Message: Please insert the water tank... although this was already installed

Root cause: The plastic nose was broken off and the micro switch was not pushed.

So i create a part to activate the switch.
In case if you want to use it:
1. remove the remains plastic nose at the original water tank (see picture)
2. Insert the printed part in the switch slot
3. Install the water tank.

3D printer file information

  • 3D design format: STL Folder details Close
    • Ecam.23.430.stl
  • 3D model size: X 16 × Y 25 × Z 30 mm
  • Publication date: 2020/09/01 at 19:16





Issue with this design? Report a problem

Best sellers of the category Tools

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!