Skip to content

Chain (test)

Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

This is really a test print to confirm movement after print-in-place. It uses a 0.6mm gap which should accommodate all printers, but will appear very loose on high accuracy ones. Even so, some prints may require pushing and pulling to release the links. This will only occur if the print settings are less giving, but all the links should release and provide movement. Print in the position as shown in the image, so that the thickness of each link sits on the print bed.

3D printing settings


  • 3D file format: STL
  • 3D model size: X 14.2 × Y 10.2 × Z 130 mm
  • Publication date: 2021/06/09 at 01:03





Issue with this design? Report a problem

Best sellers of the category Tools

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!