Skip to content

Carabiner, 60mm x 35mm x 7.5mm

Creation's quality: 4.5/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

The carabiner is printed in two parts, Body and Pin, and has a mass of 4g at 30% fill. As the pin is pulled back, it twists slightly which helps increase its stiffness. The square slots resist both bending and twisting and are angled such that the pin is always primed even when in a locked position.

I recommend placing the pin squarely in the slots first and then negotiating it into the primed position.

This carabiner is NOT FOR CLIMBING (obviously) even with stronger materials like carbon fiber or any metals. Climbing carabiners are rated for upwards of 25kN which is far beyond what can be recommended for just about any 3D printed version.

3D printer file information

  • 3D design format: STL Folder details Close
    • Carabiner, Body.stl
    • Carabiner, Pin.stl
  • Publication date: 2020/04/20 at 02:06



Issue with this design? Report a problem

Best sellers of the category Tools

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!