Skip to content

Vernier Caliper

Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

Drawn for an accuracy of 0.02mm but the vernier could not be visualized. I set it for an accuracy of 0.1mm, enough to measure 3D prints, after setting 2 samples I finished it. It was printed on an adventure 3, volume 150x150x150mm. ruler measure 150mm.

A 0.25mm gap per side was left for the assembly, the geometry was drawn so as not to use support. A file was used to remove the edges, it is pressed a little at the beginning after rubbing the parts can be used without problem, the numbers are in low relief, for better visualization can be added paint and then clean.

3D printing settings

PLA , do not use brackets.

Bed temperature 50 C

Layer height 0.18mm

Perimeter structure 3

Fill 30%, Line / Imp. speed 55mm/s, V trajectory 70

  • 3D file format: STL



Page translated by automatic translation. See the original version.

Best sellers of the category Tool

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!