Deck board spacers (3 different models)
- 205 views
- 2 likes
- 0 downloads
3D model description
Rather than buying shims for the installation of my deck, I made 4mm, 5mm shims and a 3,4,5 and 6mm multi-sided shim.
Personally, I use 5mm spacers for the spacing of my terrace boards. I only needed 4 shims of 5mm for 4m boards.
Very practical and even indispensable for a perfect installation.
3D printing settings
Multi-dimensional model 3, 4, 5 and 6 mm :
Estimated printing time: 1h 22m
Material consumption: 5.77m (14g)
Printer: Zortrax M200
Profile: Last parameters
Media Type: Automatic
Nozzle diameter: 0.4 mm
Layer: 0.29 mm
Fan speed: Auto
Exterior content: 0.00
Surface Coatings Upper: 6
Surface layers Lower: 5
Support Lite: No
Media Offset: No
First Layer Density: 100%.
First Layer Printing speed: 100%.
First Layer Flow Ratio: 100% First Layer
The gap of the first layer: 0.42 mm
Raft Activated: Yes
Rafting layers: 7
Platform distance: 0.19 mm
Raft Density: 100%.
Raft Print speed: 100%.
Raft Debit Ratio: 100%.
Support Density: 3.50 mm
Interval XY: 0.36
5mm wedge model :
Printing time with 80% fill, approx. 51 min.
Printing time is approximately the same for the 4mm model.
- 3D file format: STL
- Publication date: 2020/09/20 at 20:14
Page translated by automatic translation. See the original version.
Best sellers of the category Tool
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!