Cable stopper / end clip / shortener for throttle cable
- 239 views
- 1 like
- 3 downloads
3D model description
This is a part I designed in order to shorten my car's throttle cable to suit an aftermarket carburettor.
To use, simply pull the pedal end of the cable first through the large end slot, then over the round part and through the little end slot.
Check the length is correct and then slide a cable tie through the central hole and tighten it around the cable to lock in place.
This could be used for any number of cable-actuated mechanisms with a cable of diameter 2.0mm-3.0mm or scaled to suit.
3D printing settings
Wall thickness 1.2-1.6mm
Enable support with density 50% and 1 layer Z gap.
Infill 30-60% depending on material. I use octet for uniform strength.
Brim adhesion - 10 lines at a minimum as it is a small part.
- 3D file format: STL
- 3D model size: X 20.4 × Y 30.7 × Z 16.6 mm
- Publication date: 2020/09/24 at 09:41
Hello! I am a tinkerer and engineering enthusiast from Christchurch, New Zealand.
I have an Ender 3 V2 and a Zonestar Z6FB.
I am glad to provide all my CAD work for free as an ameteur, but if you want to return the favour, please give feedback on any designs you print of mine!
Best sellers of the category Tool
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!