Skip to content

Basic Bed Leveling knobs

Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1 like

3D model description

Bed leveling knob, and nut retainer clip. Designed for the Q3D TwoUp, but generic enough to work on others.
The hole in the knob is tight enough to self tap when driving the fastener in the first time, and does not require a nut, however the hole is also hex shaped to accept a nut if needed.
This makes for easy 1 hand bed adjustments, and mid-print adjustments.
No more fiddling with alan wrenches, and trying to hold the nut steady.

I replaced the supplied M3x30 with M3x35 for just a little extra length to account for the knob. The knob stands 9mm high to clear a 1/8" mirror bracket.
The nut retainers self-center using the springs and have a 9mm opening for the sub-bed.

this it's exactly a re-mix, but I was motivated by:

  • 3D file format: STL
  • Publication date: 2020/03/02 at 17:54





Issue with this design? Report a problem

Best sellers of the category Tools

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!