Skip to content

Bambu Lab - Poop Bucket, Filament Waste Bin - X1 and X1 Carbon

Creation quality: 4.8/5 (3 votes)
Evaluation of members on the printability, utility, level of detail, etc.


3D model description

Thanks for all of the downloads!

If you like this design, check out my AMS Desiccant Trays with Rechargeable Silica Gel:

UPDATE 3: I have now added a fourth version as per request by someone in the comments. This fourth version is both shorter and narrower. I have also removed all files and reuploaded with better naming as it was getting confusing:

V1.0 is the original remix, deeper bucket with logo.
V1.1 is the shortened version, allows for use with rear spool holder.
V1.2 is the narrower version, allows for closer position to wall etc.
V1.3 is shortened and narrower.


UPDATE 2: I have also added 'Narrower' Version. The bottom section width is originally 95.25mm - but the narrower version is now 75mm width.


UPDATE: Added the 'Shortened_Height' Version. This is more suitable for use with the rear spool holder. Top edge is 25mm lower than the original.

I remixed this as some are very chunky but I liked the original POOPY SHOE by RAMServices1959 as it's much nicer - but it didn't have a logo on the part and lower section is quite shallow.

I also wanted to make the lower section a bit deeper so it could hold more waste as I'm lazy and don't want to have to empty it too often.

Poop should fall out of the back, slide down into the lower section and then it's easy to just grab a handful out and put into my filament recycling.

I've included my Bambu 3MF file, the STEP file and two STL formats, one is a custom high density STL setting, the other is advanced mesh refinement setting - both should be good but personal preference.

Single-part, multi-colour print.

Yes, it's a big part - import it > orient it > rotate it away from 'keep-out' zone > right-click > centre it.

You may need to move the Purge Tower to a more suitable location, unless using the 3MF.


3D printing settings

NO Raft
NO Support
0.2mm Layer Height
30% Gyroid Infill
Ziro Silk PLA and Anycubic Matte Black PLA
'Standard' Speed
240°C Nozzle
3 Walls

3D printer file information

  • Design number: 1058618
  • 3D design format: 3MF, STEP, and STL Folder details Close
    • V1.0_POOPY_SHOE_ms_edit_3MF.3mf
    • V1.0_POOPY_SHOE_ms_edit_STEP.STEP
    • V1.0_POOPY_SHOE_ms_edit_STL.STL
    • V1.1_POOPY_SHOE_ms_edit_shorter_3MF.3mf
    • V1.1_POOPY_SHOE_ms_edit_shorter_STEP.STEP
    • V1.1_POOPY_SHOE_ms_edit_shorter_STL.STL
    • V1.2_POOPY_SHOE_ms_edit_narrower_3MF.3mf
    • V1.2_POOPY_SHOE_ms_edit_narrower_STEP.STEP
    • V1.2_POOPY_SHOE_ms_edit_narrower_STL.STL
    • V1.3_POOPY_SHOE_Shortened_Narrower_STEP.STEP
    • V1.3_POOPY_SHOE_Shortened_Narrower_STL.STL
    • V1.3_POOPY_SHOE_ms_edit_narrowerANDshorter_3MF.3mf

    Learn more about the formats

  • Last update: 2023-03-18 at 15:32
  • Publication date: 2023-02-11 at 16:47
    Published to Thingiverse on: 2023-02-11 at 17:34


CULTS - Private Use


Issue with this design? Report a problem.

Best 3D printer files of the Tools category

Best sellers of the category Tools

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!