Skip to content

Annular Cooling for Ultimaker V2

Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

This is a replacement annular cooling for the Ultimaker nozzle. The original cooling shroud, although functional, can sometimes be counterproductive. The unidirectional nature of the cooling stream can sometimes lift the first layer, especially when printing on a raft. The annular cooling nozzle is aimed at the printed object from all directions, thus cancelling any possible lift.

This version 2 of my previous design. It has a larger annulus to prevent it from melting, more airflow and simpler geometry. This version has only two parts to print and glue with superglue.

3D printing settings

Print both parts with flat faces on the platform. I used 0.1mm layer thickness and 100% fill for strength.

You will also need the following:

2x M3x20mm bolts

2x M3 nuts

2x M3 PCB spacer

File bolt holes using a needle-file to allow M3 bolts to pass through comfortably.

Align through the bolt holes using bolts and glue the two parts using super glue. The use of super glue accelerator is advised.

Slide assembly in place under the cooling fan through the innermost prodruding long screws.

Retighten the long screws before securing the assembly in place using 2xM3 PCB spacers. One of the bolt holes is too deep to get the PCB spacer to even get a grip on the long screw. Use a M3 bolt to joint the two PCB spacer and tighten, then use this ellongated spaced to secure the cooling assembly in place. Use a mini-wrench an an allen key to untighten the lower PCB spacer from the top then remove it. The second hole is not that deep, so the secon PCB spacer should have enough grip to tighten using amin-wrench.

Secure the rest of the assembly to the fan using 2x M3x20mm bolts and nuts.

STEP files included.


If you like this design, feel free to donate and ask for improvements:

  • 3D file format: STL
  • Publication date: 2021/04/22 at 01:35





Designs 26
Downloads 40
Sales US$18
Follower 1
Issue with this design? Report a problem

Best sellers of the category Tools

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!