This tool is designed to open 12-gauge cartridges in order to extract the shot. This then allows a slug to be inserted.
Insert a 9mm cutter blade into the groove.
Use a M6 x 30 CHC bolt and a nylstop nut.
Insert an M4 nut and an M4 screw to lock the blade.
Print the parts without support.
How to use :
Open the tool, put a cartridge inside.
Close the tool, and turn the shell clockwise 1/3 turn, and counterclockwise 2/3 turn. Then you can turn completly the shell.Do not try to turn only in one way,
This tool is designed to open 12-gauge cartridges, so that the shot can be extracted and a slug inserted.
Install a cutter blade in the slot, and tighten it with an M4 screw with its nut. There is a slot for installing the nut. Use a CHC M6 screw and a nylstop nut to assemble the tool.
Operation: Place a cartridge in the tool, close the tool and then turn the cartridge gradually in one direction and then the other. Do not try to turn in only one direction, as this will cause malfunction.
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!