100mm Duct Flange
3D model description
A flange for mounting 100mm air conditioning ducting.
Used on the window mounted exhaust panel of my fume cabinet for my RepRap Prusa Mendel. (Short description: youtube.com/watch?v=YKh6kgO77Us)
The A/C ducting is standard 100mm ducting, as used in range hoods and bathroom extraction fans.
3D printing settings
110mm x 110mm x 55mm high
4x Diameter 4.5mm countersunk holes provided on a 92mm square pitch.
The holes were designed to take some brass wood screws that I had lying around.
You need at least a 98mm hole. Be careful if you make the panel the exact width of the flange like I did in the attached picture. This doesn't leave you with much material on either side of the hole. I cut my wood in a basic grill pattern to leave some more material there.
Usage: Print flange, cut hole in panel, screw down flange, slide ducting over the lip on the end, enjoy the fresh air.
0.3mm layer height
3 perimeters, this allowed a solid printed cylindrical section
3 solid layers
You can reduce the layer height, however it will increase the print time.
3D printer file information
3D design format: STL Folder details Close
- Publication date: 2019-04-25 at 16:54
Best 3D printer files of the Tools category
Best sellers of the category Tools
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.
DONATE: If you want, you can make a donation via PayPal.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!