Skip to content

Hi naughty one! So you'd like to have fun with kinky 3D printed models?! You are right ;)

But on Cults, little bunnies have to prove they are grown up enough.

You must log in

Thicc ass pen holder set

gif 1.gif Download STL file Thicc ass pen holder set • 3D printable design, Dark3DCanada
20210129_165934.gif Download STL file Thicc ass pen holder set • 3D printable design, Dark3DCanada
13.png Download STL file Thicc ass pen holder set • 3D printable design, Dark3DCanada
14.png Download STL file Thicc ass pen holder set • 3D printable design, Dark3DCanada
10.png Download STL file Thicc ass pen holder set • 3D printable design, Dark3DCanada
11.png Download STL file Thicc ass pen holder set • 3D printable design, Dark3DCanada
12.png Download STL file Thicc ass pen holder set • 3D printable design, Dark3DCanada
15.png Download STL file Thicc ass pen holder set • 3D printable design, Dark3DCanada
Pen holder_1.stl Download STL file Thicc ass pen holder set • 3D printable design, Dark3DCanada
Pen holder_2.stl Download STL file Thicc ass pen holder set • 3D printable design, Dark3DCanada
Pen holder_3.stl Download STL file Thicc ass pen holder set • 3D printable design, Dark3DCanada
Pen holder_4.stl Download STL file Thicc ass pen holder set • 3D printable design, Dark3DCanada
Add to
?
Creation's quality: 4.0/5 (46 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 👁 51.8k views
  • 393 likes
  • 1.4k downloads

3D model description

4 variations of butts for your choosing.
The average size is roughly 122mm from the back of the legs to the top of the back, 84mm wide and 69mm high, each one varies a little as there are arms on a couple and such.
The pen hole is 15mm for the standard size (I designed it for a Huion tablet pen) printing the model at 80% will be roughly standard sharpie size, 60% will be standard bic pen sized.

3D printing settings

if you have the option to run multiple processes, running a 100% just for the first 5mm will give it some nice weight at the bottom.

3D printer file information

  • 3D design format: STL Folder details Close
    • Pen holder_1.stl
    • Pen holder_2.stl
    • Pen holder_3.stl
    • Pen holder_4.stl

    Learn more about the formats

  • Last update: 2021/03/25 at 23:10
  • Publication date: 2021/01/28 at 21:17

Copyright

©

Tags

Creator

Dark3DCanada Dark3DCanada
Designs 16
Downloads 9.4k
Sales US$8,153
Followers 824
Message

I will try to put out fun and interesting dirty designs as often as I can. If you have something you "really need" send me a msg, I will try to help out.

I do not give out the rights to sell my models, they are for personal use only.
I already sell 3D printed copies of my models world wide.

Issue with this design? Report a problem

Other 3D models from the same designer

All

Best sellers of the category Naughties

Add a comment

11 comments

contactadriangeorgescu contactadriangeorgescu

Printed it, came out really nice. If it's not too much effort, could you also design this for a set of ... two pens? Meaning there could be a spot for another too. Also, the hands (palms) see to be a bit quite large... Thank you!

  • 1 like
a73phoenix a73phoenix

I second this motion. Maybe options to have either "place" to put the pen? Front or Back or Both?

  • 1 like
contactadriangeorgescu contactadriangeorgescu

I have a two-piece set of Faber Castells. The diameter is almost fine, can resize if needed. Two places would be great. Also, like I said.. the palms are a bit too large.
Dark3DCanada Dark3DCanada

Sheenieboy, The two without arms will print perfect without supports. The two with arms I like to run supports just under the arms and the thumbs. The rest of the fingers and fingernails should print fine without the supports.

Dark3DCanada Dark3DCanada

BATTOUSAID, thank you! I'm glad you like the design and thank you very much for the support!
battousaid battousaid

Printed this and it came out amazing great job on the design

Dark3DCanada Dark3DCanada

MARCWINNJ, all the photos are just digital renders of the model. I haven't gotten around to dropping the photos of the print just yet.

MarcWinNJ MarcWinNJ

I assumed you painted this or is it done using filament changes

barfbot barfbot

No problem, appreciate it thanks! After some testing on msla on a photon s 60% holds standard pens
Dark3DCanada Dark3DCanada

Hey Barfbot, sorry I didn't get a notification for your msg. the Diameter of the hole is default set at15mm, it was originally set for a Huion screen tablet pen, which is also a suitable size for perhaps a Sharpie. If your going for say standard Bic size id say try 65% that should make the hole roughly 9mm. Hope that helps.

barfbot barfbot

do you know the correct size WxLxH it was designed at? when I import to slicer it's huge and more of a pen..cup lol
Dark3DCanada Dark3DCanada

this was actually one of my first projects where I dabbled in this sort of texture detailing in the stockings! So I'm very Happy you like it!

Mysli0210 Mysli0210

Just printed this on my new Anycubic photon mono.
Oh boy the details :D even the stitches in the stockings show perfectly!

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!