Skip to content

SIMPLE BIG 7 INCH CONIC DILDO + MOLD!!!

3D model description

Lenght: 17cm OR 6,8 in
Max diameter: 6cm

FITS BOTH MOLDS IN ONE 20X20X20 PRINTER!

INCLUDED MODEL AND MOLD
MODEL SCALABLE - DONT NEED SUPPORT

WANT ANY CUSTOM DESIGN?
email to didicults3d@gmail.com

FOR POURING RUBBER SILICONE WITH SUCTION CUP:
Leave +- 0,5cm (5mm) gap in the end of pouring, then place the base for suction cup.
A little overpouring is expected and is ok!

3D printing settings

Recomended Settings:

#MODEL PRINTING:
Material: ABS
Nozzle: 240-255ºC
Heat bed temp: 95-105ºC
Layer height: 0.10-0.20
Infill: 20-30%
Shells: 3 (at least, max recommended 6)
Raft or Brim, depends on your printer.

Finishing touches:
First - Trim excess, remove supports, sand surface.
Surface opt1 - Food grade silicone is recommended.
Surface opt2 - ABS slurry, for surface finish.

ABS is considered safe, but for more health protection ALWAYS use condom

#MOLD PRINTING:
#OPT1 MOLD:
Material: ABS
Nozzle: 240-255ºC
Heat bed temp: 95-105ºC
Layer height: 0.10-0.20
Infill: 20-30%
Shells: 2-3
Raft or Brim, depends on your printer.

Finishing touches (before molding):
First - Trim excess, remove supports, sand surface.
Surface opt1 - Food grade silicone is recommended.
Surface opt2 - ABS slurry, for surface finish.

#OPT2 MOLD:
Material: PLA
Nozzle: 180-220ºC
Heat bed temp: 50-60ºC
Layer height: 0.10-0.20
Infill: 20-30%
Shells: 2-3
Raft or Brim, depends on your printer.

Finishing touches (before molding):
First - Trim excess, remove supports, sand surface.
Surface opt1 - Food grade silicone is recommended.
Surface opt2 - Spray primer, for surface finish.

#CASTING MOLD:
WE RECOMMEND USING FOOD GRADE SILICONE, OR 00-20 SILICONE, FOR MORE SAFETY IN SKIN CONTACT.
ALWAYS USE CONDOM.

  • 3D file format: STL

Tags

Creator

Designs 95
Downloads 3206
Sales US$75
Followers

Trying new designs, improving my cad skills.

Want any custom design? Feel free to ask!

email to didicults3d@gmail.com, and I will answer as soon as possible!

Copyright

©

Best sellers of the category Naughties

Related contents


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest, Banggood, Aliexpress or Ebay.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!