Skip to content

Hi naughty one! So you'd like to have fun with kinky 3D printed models?! You are right ;)

But on Cults, little bunnies have to prove they are grown up enough.

Shark Nipple Clamp

Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

Nipple Clamp in the shape of a shark
Bolt hole is an M8 with a 1mm pitch thread, I have supplied the STL for a plastic bolt.
The tail joint hole is 3mm, Either use a piece of 3mm filament or a small bolt for this.

NOTE: I have added SharkScrew-02.stl as an upgraded screw as it has knurling at the top making it easier to tighten and twist. :P

3D printing settings

You want to keep this thing quite rigid so a high infill would be ideal. I used 20% when printing in ABS and found it seems to work prety well.
Other than that the original was printed a 0.2

3D printer file information

  • 3D design format: STL Folder details Close
    • SharkBottom-01.stl
    • SharkScrew-01.stl
    • SharkScrew-02.stl
    • SharkTop-01.stl
  • Last update: 2016/11/07 at 14:46
  • Publication date: 2016/10/09 at 23:04




Issue with this design? Report a problem

Best sellers of the category Naughties

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!