This nipple clamp (or other things) is very effective, both at crushing and stretching a nipple. It can be used alone, the ring allowing to attach weight, chain or other and allows a good grip.
When used with the stem, the nipple can be stretched very gradually and left in position.
The narrow stem bottom allows the action to be concentrated on the nipple and aerola, the wide stem bottom allows a larger part of the breast to be stretched.
Mounting: Position the tie rod in the clamp and place the nut.
Lay the clamp flat
Put a tiny drop of glue in each hole of the clamp and tie rod.
Position two connecting rods and set the four rivets.
Wait until the glue is dry before turning the whole thing over and repeat the operation.
CAUTION: rivets must ONLY be glued WITH the tie rod.
Send me your make and suggestions at email@example.com
Use at your own risk!
Four-layer printing and 70% core. Sand well to avoid unevenness; grind screws and nuts before use
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!