Mold for The Bubbly One

The Bubbly One.

Hmmm, The only thing i can say about the bubbly is: HAVE FUN!
LOL Just kidding.

A request from the hostess.
If i wanted to make a mold for the bubbly one.

https://cults3d.com/en/naughties/the-bubbly-one

This model you can make in different states.
The original i made with 8 M3x12 bolts with the heads cut off.
And with steel clamps.

Or you can make it with 3d printed clamps.
And 3d printed Pins.
The choice is yours!

I have bin asked before what kind of silicone i used.
The silicone i used was supplied by hostess of the party's

But some people use:
Dragon Skin Silicone Rubber Compound > https://www.smooth-on.com/product-line/dragon-skin/ <

Or

Refills from: > http://empirelabs.com/ <

there is a instruction video on molding with silicone at > http://sexshop3d.com/videos/ <

Like the: https://cults3d.com/en/naughties/mold-for-the-bishop-v1
If you download this model you also get the original stl file of the Bubbly One.

Have Fun!

The mold i printed 0.1 mm layer height.
The clamps and pins in 0,2 mm layer height.
Shell thickness 0.8.
Bottom/Top thickness 0.8
Mold, Clamps, Pins infill: 25%
No support.

The pins you break off the brim