Mold For the Bishop V1

My english is good but not super, so bare with me!

Some time ago i was approached by a woman who organizes dildo party's (like Tupperware party's) and gives dildo workshops, mostly for bachelor party's for woman

She ask me if i would be interested in making a mold of a dildo?
Honestly a little bitt out off my comfort zone.

But after some thought i decided to do it.
Good learning experience for making a mold.
And what better dildo to use than the Bishop V1

https://cults3d.com/en/naughties/fun-dildo

I did some research on the internet for making a 3d printed mold.
Thirst thing i noticed most of the molds i have seen use nuts and bolts to hold the mold together.
I find this such a hassle that decided to use clips.

BUT i did use some M3 bolts to center the model.

Summary:
Print one side of the model like it is in the file.
And print the other side of the mold in mirror

I printed the mold in PLA, this is for the minimum warping.

Ensure that surface of the mold's are flat and smooth.

I cut of the heads of 9 M3x16 bolts to use for the centering of the model.
And used glue on one side of the mold to hold the bolts in place.

Extra: If you download this model you also get the original stl file of the Bishop V1

Layer Height: Your Choice
For the model in picture i used 0.2

Shell thickness: 0.8
Bottom/Top thickness 0.8
Infill: 20%
No Support