This model is an exploration into the designing and making of my own sextoys. That's why I let myself be inspired by one of the most successful in the business; fleshlight. The models for the casing and the sleeve might be interchangeable with the real deal, but I have not been able to test.
When you're done printing the mold you can plug up the seams using cheap modeling clay. I coated the inside of the mold with Vaseline as a release agent but it's probably not strictly necessary. After that silicone can be poured through the opening in the top. The cap is to keep the middle inside from not tipping to either side. I used this silicone:
It has a shore hardness of ~5. I would suggest to find the lowest hardness you can find yourself. You'll need somewhere between 400 and 450 ml for the pour.
The top-cap of the stroker is also for controlling the amount of air that can pass through the end for creating a sucking effect or not.
This design was way to tight for me with the specific silicone I used. I recommend designing a less tight insert.. I will be updating the design someday with an extra insert.
I recommend 3 perimeters for all models. Use a brim for sufficient bed-adhesion for the tall models. All models should be printable without support.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!