Butt plug / Anal plug Simple (size L)

Plug Anal with simple shapes.

Length: 130 mm
Width: 50 mm
(several sizes available)

Print your anal plug (without brackets)

All materials are possible for this design:
ABS, PLA, HIPS, -Flex such as Ninjaflex and other semi-flexible filaments.

A post treatment is advised but not necessary, indeed if you want to smooth your Plug it is possible to use an acetone bath, this allows a simpler use and an easy cleaning. (more details in the description)

ABS or ABS derivative: (HIPS, PC-ABS for example)

-Buy a 1 liter bottle of acetone (about 2 €)
-Place in a well ventilated room or directly outside , be careful to read the instructions for use of the product, as it is flammable and volatile. Do not smoke or breathe the vapors that come out of it.
- the object must be watered and immersed directly in the acetone.
The ABS object will start to melt. Warning if you leave the object completely immersed for more than 5 min, it may dissolve completely !!

• to stop the smoothing you have to pass the object under water you will then obtain a matt, smooth appearance
• It is necessary to let it dry in the open air for 24 H before use.