Anal Plug "3 balls"
Length: 115 mm
Sizes of balls:
small: 27 mm
medium: 35 mm
large: 45 mm
Print your anal Plug materials are available for this design:
ABS, PLA, HIPS, as well as semi-Flex materials such as Ninjaflex and other semi-flexible filaments.
A post treatment is advised but not necessary, indeed if you want to smooth your Plug it is possible to use an acetone bath, this allows a simpler use and an easy cleaning. (more details in the description)
ABS or ABS derivative: (HIPS, PC-ABS for example)
-Buy a 1 liter bottle of acetone (about 2 €)
-Place in a well ventilated room or directly outside , be careful to read the instructions for use of the product, as it is flammable and volatile. Do not smoke or breathe the vapors that come out of it.
- the object must be watered and immersed directly in the acetone.
The ABS object will start to melt. Warning if you leave the object completely immersed for more than 5 min, it may dissolve completely !!
Page translated by automatic translation. See the original version.
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.