- 3.2k views
- 9 likes
- 11 downloads
3D model description
The idea was initially to test the possibility of making a plug with an opening. It turns out that it works not too bad to print. A test you :)
3D printing settings
55 mm high
35 mm wide (the biggest)
28 mm wide (at least roughly)
20mm wide (center)
Printing ABS, light sanding and finish with acetone. The record is more slippery. Clean with soap after treatment.
0.1 mm on Z
50 mm / s in advance
24% of filler
Nozzle to 235 ° C
Plate at 100 ° C
No support, easy printing from the large base
3D printer file information
3D design format: STL Folder details Close
- Last update: 2019/10/14 at 12:38
- Publication date: 2016/10/16 at 18:47
Best sellers of the category Naughties
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!