Skip to content

heart jewelry stand

3D model description

I present you a heart jewelry stand that can contain 16 pairs of earrings, as well as rings, necklaces and bracelets

the core is 19.5 cm long and 19.5 cm wide and 4.5 mm deep, the printing time is 3h 7 min

the core support is 13.7 cm long and 13.7 cm wide and 1.7 cm deep, the printing time varies between 4 h 25 min

the support fits at the tip of the heart, no need to glue it

3D printing settings

30% sufficient filling rate if subsequently painted

80% printing speed not too fast for better rendering

215 ° PLA printing temperature

60° tray temperature

0.2 layer thickness

0.8 hull thickness

0.8 thickness above/below


  • 3D model format: STL



Followers Following 199
Downloaded 1718
Sales $83

je modélise depuis janvier 2017, c'est devenu ma passion...

chaque objet est modélisé, imprimé et s'il y a un défaut il est corrigé avant d'être partagé...
bonne impression... : .la créativité c'est l'art d'accomplir ces rëves
et quelques une de mes créations imprimés, ponçé, peinte et vernis sont sur :

I model since January 2017, it became my passion ...

each object is modeled, printed and if there is a defect it is corrected before being shared ...
good impression ...: creativity is the art of accomplishing these dreams
and some of my creations printed, sanded, painted and varnished are on:



Page translated by automatic translation. Suggest a better translation

Similar 3D files

Add a comment