Mini Grand Piano Music Treble Clef Clip-on or Dangle Earrings

These mini piano earrings are perfect for musicians and music lovers alike! There are three available styles for these earrings, including a clip-on option (see the file guide), so you can choose the look that best fits you. Please share photos if you print them out, and don't hesitate to contact me with any questions or requests. Happy printing!

How to assemble: To connect the piano and treble clef prints, first use scissors to carefully cut the large loop of the treble connector near the top. Then you can carefully link it with the loop on the piano. I recommend doing this before painting so that the paint can cover up the line where the cut was made. Also, be very careful removing supports! This is a delicate model, especially the legs of the piano.

For "piano_earring" and "piano_earring_treble":
Layer height: 0.12 mm
Infill: 100%
Supports: Auto-generated supports - ***Be very careful removing the supports, especially around the legs of the piano - this model is very delicate.
Print time: 1 hr 7 min (each - 2 hr 14 min for a pair)

For "treble_connector" and "treble_connector_clipon":
Layer height: 0.18 mm
Infill: 17%
Supports: None
Print time: 7 min (each - 14 min for a pair)