Skip to content

Element Pendants (Frozen 2)

Creation quality: 5.0/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.


3D model description

Earth, Water, Fire, Wind, and the Fifth Element pendants for necklaces, earrings, or charms. (Bonus! Bead model included.) Inspired by the movie Frozen II, I made these pendants to capture the spirit of the movie. So many combinations of styles are possible!

Included in the download are "top" models for each element along with one "back" that works for all of them. Each element is also included as a whole model for easy single extrusion printing. I also saved the whole set of backs and the whole set of tops as models for a quick setup. This is how I initially printed them and in less than 30 minutes.

I added a model for a magnetic "hanger" for the pendants since I wanted a way to display them without being on a necklace. I would not recommend a refrigerator since they will jiggle off. Indentation on back is for a round magnet 20 mm diameter, 2 mm thick.

Note: In the photo of the necklace with three elements, the snow element is printed with the x- and y-scales increased to 150% and the z-scale is still 100%.

Also see my:

and other pendants:

Note: I named the Fire and Earth elements according to what I saw online at the time I made these. Since then I have seen some Disney toys that have those elements switched (and I think that actually makes more sense), but I didn't want to go back and change my file names or original prints here.

3D printing settings

Each pendant is approximately 10 mm x 41 mm x 2.5 mm. I printed these with 0.2 mm layer height, 1 outline/perimeter shell, 100% infill, no raft, and no supports.

Most beads we had available at home did not have large enough holes to put on a finished chain, so I designed my own! And they have the added benefit of matching colors.

Bead is 10 mm x 10 mm x 8 mm (height). The hole has a diameter of 6 mm (or 7 mm in vase mode). Prints well as full object and in vase/spiral mode. Vase mode is lighter weight and prints faster. For vase mode, I selected "Merge all outlines into a single model" in Simplify3D and used 0 top layers and 0 bottom layers. I used 0.2 mm layer height.

3D printer file information

  • 3D design format: STL Folder details Close
    • Bead 1.stl
    • Element Pendant Back for Dual.stl
    • Element Pendant Earth Top.stl
    • Element Pendant Earth.stl
    • Element Pendant Fire Top.stl
    • Element Pendant Fire.stl
    • Element Pendant Snow Top.stl
    • Element Pendant Snow.stl
    • Element Pendant Water Top.stl
    • Element Pendant Water.stl
    • Element Pendant Wind Top.stl
    • Element Pendant Wind.stl
    • Element Pendants All Backs.stl
    • Element Pendants All Tops.stl
    • Elements Pendants Hanger.stl

    Learn more about the formats

  • Last update: 2020-11-03 at 18:04
  • Publication date: 2019-11-28 at 00:10


CULTS - Private Use


Issue with this design? Report a problem.

Collection associated with this 3D model

Best 3D printer files of the Jewelry category

Best sellers of the category Jewelry

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!