I present to you one of my creations a pair of earrings in the form of ladder with a man who climbs on it.
Its two elements are separate and the man clip on it allows to make them of two different colors.
The earrings were printed in PLA and painted with acrylic paint then I varnished them with an aerosol all supports fast drying (inside / outside).
On the picture the jewelry was printed with PLA bronze and red translucent
Earring scale measuring length 4,2 cm width 1,2 cm depth 2 mm the man measures him length 3cm width 1,2 cm and 1,3 mm depth
50% enough filling ratio for jewelry
70% print speed not too fast for better rendering
215 ° PLA printing temperature
60 ° shelf temperature
0.2 layer thickness
0.8 hull thickness
With support at the cover
8 min print time for both earrings
je modélise depuis janvier 2017, c'est devenu ma passion...
la créativité c'est l'art d'accomplir ces rêves
ma page facebook : https://www.facebook.com/catf3d/?modal=admin_todo_tour
instagram : https://www.instagram.com/catf3d/
twitter : https://twitter.com/catf3D
tumblr : https://catf3d.tumblr.com/
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.