Skip to content

earring leaves

3D model description

I made two pairs of earrings in the shape of leaves, a playful, funny jewel, very different from all other jewelry... that can be decorated to your taste.

very original, sensual and elegant jewellery

ATTENTION JEWELS BEING ABLE TO FLY AWAY IN THE EVENT OF STRONG WIND :)

for full sheets: length 6 cm width 2,5 cm and 2 mm thickness added rings of 6 mm

for transparent sheets: length 5 cm width 2 cm and 2.7 mm thickness added 6 mm rings

3D printing settings

100 % sufficient filling rate for jewellery

20% print speed not too fast for better rendering

215 ° PLA print temperature

60° tray temperature

0.1 layer thickness

0.8 Hull thickness

printing time 29 min for the pair of full earrings

printing time 19 min for the pair of transparent earrings

  • 3D model format: STL

Tags

Creator

Followers Following 205
Downloaded 1874
Sales $88

je modélise depuis janvier 2017, c'est devenu ma passion...

chaque objet est modélisé, imprimé et s'il y a un défaut il est corrigé avant d'être partagé...
bonne impression... : .la créativité c'est l'art d'accomplir ces rëves

http://www.catf3d.fr/
et quelques une de mes créations imprimés, ponçé, peinte et vernis sont sur :
https://www.lecoindescreations.com/vendeur/catf3d/

I model since January 2017, it became my passion ...

each object is modeled, printed and if there is a defect it is corrected before being shared ...
good impression ...: creativity is the art of accomplishing these dreams

http://www.catf3d.fr/
and some of my creations printed, sanded, painted and varnished are on:
https://www.lecoindescreations.com/vendeur/catf3d/

Copyright

©

Page translated by automatic translation. Suggest a better translation

Similar 3D files

Best sellers of the category Jewelry


Add a comment