Skip to content

earring horns

3D model description

I made earrings shaped horns.

playful, funny, original jewels, very different from all other jewels ... can be decorated to your taste

length 3 cm width 2 cm and 4 mm thick added a nails on each earring with a 6mm PLATE - ROD LENGTH 12mm - STEEL DIAMETER 0,7mm

the stem passes through the earring for better hold

3D printing settings

100% filling rate sufficient for jewelry

20% print speed not too fast for better rendering

215 ° PLA printing temperature

60 ° plateau temperature

0.1 layer thickness

0.8 shell thickness

printing time 23 min for the pair of earrings

  • 3D model format: STL



Followers Following 185
Downloaded 1496
Sales $72

je modélise depuis janvier 2017, c'est devenu ma passion...

chaque objet est modélisé, imprimé et s'il y a un défaut il est corrigé avant d'être partagé...
bonne impression... : .la créativité c'est l'art d'accomplir ces rëves
et quelques une de mes créations imprimés, ponçé, peinte et vernis sont sur :

I model since January 2017, it became my passion ...

each object is modeled, printed and if there is a defect it is corrected before being shared ...
good impression ...: creativity is the art of accomplishing these dreams
and some of my creations printed, sanded, painted and varnished are on:



Page translated by automatic translation. Suggest a better translation

Similar 3D files

Add a comment