Careful, it is pointy as the original.
(The sensation felt when overcome a certain pressure point is almost identical painful)
This is an easy print.
No supports needed.
I printed this with a .25 nozzle and a layer height of .150
Around 3,5 hrs and roughly 16gram.
Cooling increasingly to the top would be good.
I printed it this way, not sure if it was needed though.
In between the "branches" are small balls for decoration.
Just accept the challenge to paint them :)
-added Variante3.5, prints easy without any support but needs cooling.
Has a 5mm hole in the middle of the base, fits appropriate LED-tealights.
-added Variante1 & Variante2
//edit 2018-11-29: added "V2", it is without the balls in the branches, if you like the model for a diorama or such...
I do not follow any religion, but since there are people out there that do,
and for some it is kinda season, i would like to provide something.
This was made with Fusion360.
Maybe someone likes it.
Challenge me, give me the opportunity to grow and to learn more skills,
send me a note or comment if you want some alteration to it.
I could try to add it and would learn in the process a little more of the softwares i use and you would get the .stl you want. Win/Win?
Don't be shy, but don't be rude either :)
Have fun and all the best to you and your loved ones,
whoever you are and whatever you believe!
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!