Skip to content

Wine Glass Marker - Subtle, practical and stylish 3D printing talking point!

?
Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1.4k views
  • 2 likes
  • 19 downloads

3D model description

This is a great solution to differentiate wine glasses during dinners, at parties and events.

Wine glass markers commonly available in shops are usually attached via a clip or chains etc. Clip on types only often only fit specific stem diameters and the chain types aren't always easy to fit and remove and not everyone likes the look of them.

These wine glass markers will easily fit onto any wine glass with a stem of up to 10mm. Just push the slotted area into the stem, rotate 90 degrees and it's in place and can't come off without reversing the process.

Easy print in a range of colours and pause part way through to change colours to add to your range of unique markers. Colours can represent everything from bees (yellow/black stripes) through to flags colours etc. (i.e. Use red/white/green stripes for Italian flag colours).

There is built in support that snaps away easily (but still takes care as it is a very small thing).

This is a fantastic 3D printing talking point as it demonstrates another simple application for this amazing technology.

3D printing settings

Print with 3 or 4 shells and 35% or greater infill with Raft on. Leave support off as the required support has been designed in already.

Use Z-Pause (on a Replicator 2) to change filament colours to suit during the print.

The support will need a small amount of force to break it away from the upper edge of the print. Once the tip is free the remainder should pull away easily.

Easy to print, is of practical value, and can be a real talking point as well as much lower cost than buying a set in store!

  • 3D file format: STL

Tags

Creator

Designs 254
Downloads 21.2k
Followers 175

License

CC BY

Collection associated with this 3D model


Best sellers of the category Home


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!