Living in a Faraday cage, radios do not get a good signal in my home. Normally, I just run an antenna out a window and be done with it, but without modifying my weather radio, and external antenna wasn't an option. Luckily, placing it next to a window in the kitchen gives it good enough access to the airwaves to get a reliable signal. I just needed somewhere to place it.
Enter the general purpose shelf. This is designed to be hung with two screws and there is a slot down the back in which you can run the power cord. It's simple and effective. What more do you need?
Print it with 1.6mm walls, 1.0mm top and bottom at either 0.2 or 0.3mm layer height with 20% infill in the orientation presented. Supports are not necessary.
I am a self-proclaimed know-it-all. I will tackle any project regardless of my experience, or lack thereof. Always ready to learn something new. With over 25+ years experience in electronic repair and 10+ years experience in small engine / ATV / motorcycle repair, there is nothing I can't fix, modify or build.
Why a pepper? In case anyone is curious as to why there is a hot pepper embossed into most of my designs... My nickname is Pepper and that little pepper logo is a hell of a lot shorter than "Copyright © 2017 by Derek J.G. Tombrello" which is how I usually sign my work :)
In addition to PayPal.me donate using bitcoin via my address: 1DdWx5E86iQsVam361q3T4qMGKXdGBRCxx --or-- dogecoin at: DEKT6CjdR3uAKQjmiGteTAg8gvKphY9tw5
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!