Wall mounted controller shelf. Designed to hold PS4 / PS4 Pro controller. Cannot confirm it will work for other controllers but it's a generous size so it might work just fine. The 2-part design consists of a mounting block that should be secured to the wall using 2 screws and then the main shelf body slides onto the mounting block.
Visit my website to see more designs and work I have done. www.adylinn.com
STLs included: controller shelf and mounting block (files have been repaired and saved in optimal orientation).
Files included: Print and Finishing Info (.txt and PDF) and License (PDF)
Recommended Print Settings:
Filament choice is not important (PLA, ABS, HIPS, PETG etc all options).
Use recommended temperature settings for filament chosen (~210 / 70 PLA, ~240 / 110 ABS).
Support recommended - mounting slot on shelf (~2g / 0.26m).
Adhesion - Brim or skirt
Speed - 50-80 mm/s or whatever you are comfortable with
Infill - 65% (stand is lightweight so extra infill helps increase weight)
Layer Height - 0.1 - 0.3mm
Orientation - shelf body: laying on side, mounting block: laying on back. Your slicer should already import in the optimal orientation.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!