Wall coat hook “caliendrum coral”

Three different coral inspired wall hooks.
Often you don’t have enough hooks for your clothes and accessories – with these designs you can always add more extra pieces to one hook.

All three designs are provided in two versions. One with the cut-out holder for fixation with screws and one with a flat back for fixation with wall mount glue.

Instructions (screw version)
- Print the hook and the according holder. The holder has a clearance of 0.2 mm to slide in with a little friction. If your printer has issues with bridging, and the holder does not fit – you can scale the holder down a bit.
- Mount the holder onto the wall with screws and dowels. The Diameter of the screw holes is 5.5 mm. The distance of the screw holes is 16 mm.
- Slide in the holder from the side.

Instructions (glue version)
- Print the complete corals and glue them to your wall with specialized wall mount glue.

Size approximately: 80x80x60 mm
You can mirror the corals in your slicer to have 6 different versions.
Don’t forget to post your makes!

Want to sell prints of the design? Get your commercial licence here

Material usage per coral: ca 40g
Print time per coral: 3-4 h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 5 (2mm thickness)

Top/Bottom Layers: 6 (1,2mm thickness)
Infill: 30%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram