Skip to content

Very Compact Foldable Pasta Dryer

3D model description

FRANÇAIS

Hi There,

As my children offered me a pasta machine, i wanted to buy a pasta dryer. All the models i saw were foldable, but when not used, they take a lot of place because the sticks stay in place.

So i draw this model, where all the sticks fit in the central axis, so when stocked, this pasta dryer is really compact.

Sticks are made with 9x8 aluminium tube

You will ned to print:

1x Foot

1x Low axis

1x High axis

1x Tube holder 1

8x Tube holder 2 9

1x Tube holder 10

1x Cap with logo

1x Logo Insert

13x Aluminium tube plug

You will need to cut:

13 parts of 9x8 Alu tube, 215mm long.

ASSEMBLY:

Glue together the part called "Pied" with "Axe bas", and this ensemble with "Axe haut".

Glue the logo insert in "Cap with Logo".

If you are like me, and prefer non shinny flat surfaces, you can sand the top of this tap, it have a good render.

Depending on the resolution of your printer, may be you'll have to sand a little bit before glueing.

You don't know how to sand easily: have a look and consider this wet sanding machine i published a few months ago : https://www.thingiverse.com/thing:3969508

Insert the 13 caps at one end of the tubes.

Insert the 10 tubes in "Tube Holder", indifferently, visible heading.

You've seen you have 3 models of "Tube Holder",

N°1 is the first to be inserted on axis,

N°2 to N°9, are following,

10 will be the last one,

Insert the 3 last tubes in "Pied",

Add the upper axis cap,

And Voilà!!

Make a lot of delicious fresh pastas and let dry them !!!

Enjoy.

ENGLISH:

Hey, guys,

Since my children gave me a pasta machine, I wanted to buy a pasta dryer. All the models I saw were foldable, but when not in use, they take up a lot of space because the rods that hold the pasta stay in place.

I designed this model, where all the supports fit into the central axis, so once stored, this pasta dryer is really compact.

Supports and tripod are made of 9x8 aluminium tube

You'll have to print:

1x Foot

1x low axe

1x High axis

1x Tube holder 1

8x Tube holder 2 9

1x Tube holder 10

1x Cap with logo

1x Insert a logo

13x Aluminium tube plug

You'll have to cut:

13 pieces of 9x8 Alu tube, 215 mm long.

ASSEMBLY:

Glue together the part entitled "Foot" with "Low Axis", and this set with "High Axis".

Glue the logo insert in "Cap with Logo".

If you're like me and prefer flat, non-glossy surfaces, you can sand the top of this cap, it has a good finish.

Depending on the resolution of your printer, you may need to sand a little before gluing.

Can't you sand easily?

Take a look at this wet sander I published a few months ago: https://www.thingiverse.com/thing:3969508

Insert the 13 plugs at one end of the tubes.

Insert the 10 tubes into the "Tube Holder", indifferently, cap visible.

You saw that you have 3 models of "Tube Holder",

No. 1 is the first to be inserted on the axis,

No. 2 to No. 9, follow,

No. 10 will be the last,

Insert the last 3 tubes into "Foot",

Add the top shaft cap,

There you go.

Make lots of delicious fresh pasta and let it dry !!!

  • 3D file format: STL

Tags

Creator

Copyright

©

Page translated by automatic translation. See the original version.


Best sellers of the category Home


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!